Sigma X-80 XP 1 kW, 80–6 m
High-power end-fed vertical antenna for 80–6 m, 6 m aluminium, 4:1 UNUN in IP65 box, 1 kW PEP, SO-239
The Sigma X-80 XP is a high-power end-fed vertical antenna that, with a tuner, works from 80 to 6 metres. It handles 1 kW PEP and uses aluminium tubes with a 1.2 mm wall (18 gauge), thicker than the standard X-80.
Product description
It mounts on a mast, at ground level or in an elevated position. It comes with fixings and an installation guide.
It is fed with 50 Ω coaxial cable via the SO-239 socket at the base. A 4:1 UNUN transformer, in a sealed IP65 box below the 6 m telescopic aluminium element, reduces the impedance at the feed point: the antenna becomes more efficient and is easily tuned with an external tuner.
The UNUN is DC shorted: if there is a lot of static noise you can ground the antenna without affecting the tuning. Use good-quality 50 Ω coaxial cable.
Key features
Reinforced 1.2 mm tubes.
With a tuner.
In a sealed box.
Compatibility and notes
The 1 kW rating applies to intermittent amateur use (CW or PEP); for digital and continuous-carrier modes (FT8/FT4, RTTY and similar) the recommended maximum is 200 W. With a power amplifier an external tuner between antenna and amplifier is essential, otherwise damage may occur.
Technical specifications
| Type | End-fed vertical |
| TX frequency | 3.5–52 MHz |
| RX frequency | 1.8–55 MHz |
| Power | 1 kW PEP or CW · 200 W digital modes |
| Transformer | 4:1 UNUN in IP65 box |
| Connector | SO-239 (50 Ω nominal) |
| Length | 6 m |
| Tubes | Aluminium, 1.2 mm wall |
| SWR with ATU | 1:1 · manual on 80/17/12/6 m · automatic or manual on 40/30/20/15/10 m |
Package contents
- X-80 XP antenna
- Fixings
- Installation guide
HamRadioShop | HF vertical antennas