RM KL 405V
HF linear amplifier • 180 W max • 1–10 W drive • Guaranteed Used
Before you buy
Amplifier for the 10 metre amateur band. Use on the other HF bands in the 1.8–30 MHz range requires a suitable low-pass filter. Do not exceed 10 W of drive in any operating mode. Required power supply: 13.8 Vdc ±1 V, with a 30 A power supply.
Used unit. Contact us to confirm included accessories and cosmetic condition. The technical values below are declared by the manufacturer for the model, not test measurements of the individual unit.
Product description
The RM KL 405V is an HF linear amplifier with maximum output power of 180 W and input power from 1 to 10 W in all supported modes. The six-position front selector lets you adjust the power level, adapting amplification to operating needs.
The V version integrates an 80 mm fan mounted on the heatsink. The receive preamplifier, with electronic switching and activated from the front panel, completes the functions available to the operator. Compatible with SSB, CW, AM and FMmodes, it is offered in the HamRadioShop Guaranteed Used.
Key features
|
180 W maximum output Drive from 1 to 10 W in all supported modes. |
Six-position selector Power adjustment via front control. |
|
Ventilation of the V version 80 mm fan mounted on the heatsink. |
RX preamplifier Electronic switching and activation from the front panel. |
The HamRadioShop Team's Opinion
An option for anyone looking for a linear with modest drive requirements and power adjustment accessible from the front. The fan distinguishes this version from the standard KL 405. To integrate it into the station, an adequate power supply and correct filtering for the band in use are essential.
Manufacturer's technical specifications
| Brand / model | RM Italy KL 405 V |
|---|---|
| Operating band | 10 metre amateur band; 1.8–30 MHz with suitable low-pass filter |
| Operating modes | SSB, CW, AM, FM |
| RF input power | 1–10 W max, all modes |
| RF output power | 180 W max |
| Power adjustment | 6-position selector |
| Power supply | 13.8 Vdc ±1 V; 30 A power supply |
| Maximum current draw | 22 A |
| RF transistors | 2 × RM SD1446 |
| Input SWR | 1,1–1,5:1 |
| Maximum output SWR | 2,5:1 |
| Maximum power in bypass | 50 W, amplifier switched off |
| RX preamplifier | Activated from the front panel, with electronic switching |
| Cooling | Heatsink and 80 mm fan |
| Fuses | 3 × 12 A fast-blow, 5 × 20 mm |
| Dimensions | 215 × 190 × 83 mm |
| Declared weight | 1,420 g |
| Condition | Guaranteed Used |
Data source: official RM Italy KL 405 V data sheet and KL405 manual. The stated performance figures are the values declared by the manufacturer.