PST-6816FP C5

Description:
Full-size multi-band wire dipole in parallel configuration with added loads for the lowest band.
Assembly instructions:
Unroll the two arms carefully, avoiding bumping any loads and taking care not to create kinks in the wires.
The dipole can be installed as an open dipole or in an inverted V configuration.
For optimal performance, position the apex of the inverted V at least 10-15m from the ground, or as high as possible. Greater heights will shift the resonance upwards, while lower heights will shift it downwards. Maintain an opening angle between 90 and 110 degrees.
Any adjustments for each individual band can be made by lengthening or shortening the corresponding end.
Lengthen to lower the resonance point, shorten to raise the resonance point.
Correct operation may be influenced by environmental conditions. If necessary, perform several tests to find the best condition.
Specifications:
Gain = 0 dBd
Impedance Inv V = 50 ohm (if installed and optimized correctly)
Maximum power: 1.5KW PEP or 5KW (depends on the chosen version)
SWR 60m = <1.5:1 at band center
SWR 80m = <1.3:1 at band center (usable bandwidth approximately 200Khz)
SWR 160m = <1.3:1 at band center (usable bandwidth approximately 40Khz)
Length = as per drawings for each individual model, each antenna is made slightly longer than necessary so that it can be tuned more easily (lengths are indicative and may vary during final tuning)