Description
The Xiegu X6100 is an ultra-portable SDR (Software Defined Radio) transceiver for HF and 6m. High performance and rich functionality are provided by a direct conversion and sampling architecture. With its compact size and smart form factor, the X6100 brings you a new ham radio experience. The X6100 features independent baseband and RF units. The baseband unit provides control, advanced data processing, digital signal processing, multimedia interface functions and can continuously add new functions via firmware updates. The RF unit is based on the SDR structure with separate transmit and receive paths. With a 24-bit sampling rate and a wide dynamic RF front-end unit, the X6100 is a high-performance transceiver that allows you to work worldwide when you are out for a wilderness adventure, in a camper, or on a remote beach. The X6100 features two USB interfaces, a USB to serial adapter with sound card and another to support mouse, keyboard, and storage devices. A microSD card slot allows for memory channel backup and voice keyer recordings. An XPA125B amplifier can be connected via a dedicated cable (optional accessory) to provide 100W transmit power. External third-party SDR software applications like HDSDR can be connected via the I/Q signal output.
Main features of Xiegu X6100
- HF/50MHz all modes including data
- 10 W transmit power with external power source, 5 W with internal battery
- 4" high-resolution color screen, 800 * 480 pixel resolution
- Built-in large capacity lithium battery pack, 12V, 3.5 Ah
- Efficient built-in automatic antenna tuner
- Standing wave scanner
- Voice memory keyer
- CW memory keyer
- Bluetooth and WiFi support wireless audio, keyboard and mouse
- Built-in USB serial adapter with sound card
- Second USB host port to support mouse, keyboard and storage device
- High stability TCXO internal clock source
Xiegu X6100 General Specifications
- Frequency Coverage: 0.5-30+50-54MHz (transmit in amateur bands)
- Operating Modes: USB/LSB (J3E), CW (A1A), FM (F3E), RTTY (F1B), AM (A3E)
- Minimum Frequency Step: 1 Hz
- External Power Supply Voltage: DC9-15V
- Frequency Stability: 1 ppm (after 20 min warm-up)
- Antenna Impedance: 50 Ohms
- Antenna Connector Type: BNC
- Operating Temperature Range: 0C to +50C
Xiegu X6100 Receiver Specifications
- Frequency Coverage: 0.5-30+50-54MHz
- Receive Sensitivity (10dBS/N)
- (PRE=on, ATT=off, NB=off, NR=off, SSB/CW/AM = 10dB S/N, FM = 12dB SINAD)
- SSB/CW: 0.20uV
- AM 0.55-1.79 MHz: 10 uV
- AM 1.8-30 MHz: 2 uV
- AM 50-54 MHz: 2 uV
- ADC: 24 bit Spectrum display bandwidth: 96 kHz
- Spectrum refresh rate: 25 frames/s
- Spectrum noise floor: -140 dBm
- Audio output: 0.5W (4 Ohms =10% THD)
- 2kHz BDR (critical frequency suppression): =110 dB
- RMDR: =85 dB
- IMD3: =95 dBDS: -138 dBm
Xiegu X6100 Transmitter Specifications
- Frequency Range
- 1.8~2.0 MHz
- 3.5~3.9 MHz
- 5.3515~5.3665 MHz
- 7.0~7.2 MHz
- 10.1~10.15 MHz
- 14.0~14.35 MHz
- 18.068~18.168 MHz
- 21.0~21.45 MHz
- 24.89~24.99 MHz
- 28.0~29.7 MHz
- 50~54 MHz
- Output Power, Internal Battery: 5W
- Output Power, External Power: 10 W
- Spurious Suppression = 60dB Sideband Suppression: =50dB
- SSB Frequency Response: 300-2700Hz (-6dB)
- FM Modulation Swing; +/- 5kHz
- Microphone Impedance: 0.2-10k (600 Ohm typical)
- Antenna Tuner Tuning Impedance Range: 12.5-200 Ohms
- Antenna Tuner Initial Tuning Time: = 10 s
- Antenna Tuner Memory Recall Time = 0.1 s
Xiegu X6100 General Specifications
- Dimensions: 180 x 86 x 49 mm
- Weight: 1.5 kg
